Chemical Pump Troubleshooting Guide

Knowledge Base Pump Selection Guide Pump Material Guide Maintenance Guide Troubleshooting Downloads FAQ

Pump Overheating and Motor Overload: Causes and Fixes

Pump overheating is a location question first: hot bearings, a hot casing, and a hot motor are three different problems. Here is how to locate the heat, read the ammeter, and fix t...

Self-Priming Pump Won't Prime: Causes and Fixes

A self-priming pump that won't prime has one of six causes: no fill, suction air leaks, excess lift, foot valve trouble, internal wear, or a blocked air exit. Here is how to find a...

Magnetic Pump Dry-Running and Decoupling: Field Diagnosis

Dry running and coupling decoupling are the two events that shorten magnetic drive pump life. Learn their field signatures, how to tell them apart, and the protection practices tha...

Mechanical Seal Leaking: Causes and Step-by-Step Fixes

A leaking mechanical seal is a symptom with a nameable cause. This guide classifies the six most common leak causes on chemical pumps and gives the step-by-step repair procedure th...

Pump Vibration and Noise: How to Diagnose the Cause

Vibration and noise are a pump's earliest fault signals. This guide maps the six most common causes, misalignment, bearing wear, imbalance, cavitation, looseness, and pipe strain, ...

Pump Not Pumping: No Flow and Low Flow Diagnosis

Most no-flow and low-flow faults live outside the pump casing. This guide works the five-step diagnostic sequence, priming, rotation, suction path, system demand, internals, plus t...

Chemical Pump Troubleshooting: Symptom-Cause-Fix Master Guide

A symptom-based troubleshooting reference for chemical pumps: safety preparation, a master table mapping nine symptoms to causes and ordered fixes, the diagnostic habits that local...